Filter
Top Products
3-46
Chapter 3: BIOS setup
Chapter 3
ASST 1 Fan Min. Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the minimum assistant fan duty cycle.
The values may differ via Qfan tuning.
Allow Fan Stop [Disabled]
These items allow the assistant fans to run at 0% duty cycle when the
temperature of the source is dropped below the lower temperature.
Conguration options: [Disabled] [Enabled]
ASST 2 Fan Q-Fan Source [CPU]
This item controls the assigned fan according to the selected temperature source.
Conguration options: [CPU] [MB] [VCORE] [VCORE(BACK)] [DRAM] [PCH Core]
[PCIE-1] [PCIE-2] [T_Sensor1] [T_Sensor2] [T_Sensor3]
If you select T_SENSOR 1/3, plug a thermistor cable to T_SENSOR 1/3 headers and stick
the thermistor cable’s head to the desired component as the temperature source.
ASST 2 Fan Speed Low Limit [300 RPM]
This item allows you to disable or set the assistant fans’ warning speed.
Conguration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
ASST 2 Fan Profile [Standard]
This item allows you to set the appropriate performance level of the assistant fans.
[Standard] Set to make the assistant fan adjust automatically depending on the
chassis temperature.
[Silent] Set to minimize the fan speed for quiet assistant fan operation.
[Turbo] Set to achieve maximum assistant fan speed.
[Manual] Set to assign detailed fan speed control parameters.
The following items appear only when you set the ASST 2 FanProle to [Manual].
ASST 2 Fan Upper Temperature [70]
Use the <+> or <-> keys to adjust the upper limit of the CPU temperature.
The values range from 40°C to 90°C.
ASST 2 Fan Max. Duty Cycle(%) [100]
Use the <+> or <-> keys to adjust the maximum assistant fan duty cycle.
The values may differ via Qfan tuning.
ASST 2 Fan Lower Temperature [40]
Use the <+> or <-> keys to adjust the assistant fans’ lower temperature.
The values may differ via Qfan tuning.
ASST 2 Fan Min. Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the minimum assistant fan duty cycle.
The values may differ via Qfan tuning.
Allow Fan Stop [Disabled]
These items allow the assistant fans to run at 0% duty cycle when the
temperature of the source is dropped below the lower temperature.
Conguration options: [Disabled] [Enabled]vv