ATEN Technology CS9134 Switch User Manual


 
7
Chapter 2
Hardware Setup
Before you Begin
Stacking and Rack Mounting
Stacking
CS9134 / CS9138 switches can be stacked one on top of the other using the
stacking brackets that come already attached to the unit. Line up the four
bottom brackets of the top unit with the four top brackets of the bottom unit;
then fit the top unit down onto the bottom unit.
1. Important safety information regarding the placement of this
device is provided on page iv. Please review it before
proceeding.
2. Make sure that power to all the devices you will be connecting
up have been turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.
cs91348.book Page 7 Thursday, May 3, 2007 2:28 PM