Filter
Top Products
F5 SKP:
This function enables you to easily skip backward or forward - switching the
KVM focus from the currently active computer port to the previous or next
available one.
w The selection of computers to be available for Skip Mode switching is
made with the Scan/Skip Mode setting under the F3 SET function
(see p. 31).
w When you are in Skip Mode, press:
←
To skip from the current port to the previous port in the List.
→
To skip from the current port to the next port in the List.
↑
To skip from the current port to the last port of the previous
station in the List.
↓
To skip from the current port to the first port of the next
station in the List.
Note: When you Skip, you only Skip to the previous or next available
computer that is in the Scan/Skip Mode selection
(see p. 31).
w If a Port has been selected for Scan/Skip Mode, when the focus switches
to that port a Left/Right Triangle symbol appears before its Port ID
Display to indicate so.
w While Skip Mode is in effect, the console will not function normally. You
must exit Skip Mode in order to regain control of the console.
w To exit Skip Mode, press [Spacebar] or [Esc].
2005-04-26
CL-1208 / CL-1216 User Manual
36