Filter
Top Products
Rack Mounting
Standard Rack Mounting
A standard rack mounting kit is provided with your CL-1208 / CL-1216. The
kit enables the switch to be mounted in rack with a depth of 45 - 85 cm.
To rack mount the switch, do the following:
1. Slide the switch into the rack and screw the front brackets to the rack.
2. Slide the L brackets onto the switch, from the rear until the bracket
flanges contact the rack, then screw the brackets to the rack.
Note: It may take two people to position the switch correctly while
performing these procedures.
2005-04-26
CL-1208 / CL-1216 User Manual
60