Filter
Top Products
List Hotkey Settings
To see a listing of the current hotkey settings, do the following:
1. Invoke HSM (see p. 10).
2. Press and release the F4 function key.
3. Open a text editor or word processor and use its Paste
function to display the settings.
USB Reset
If the USB loses focus and needs to be reset, do the following:
1. Invoke HSM (see p. 10).
2. Press and release the F5 function key.
Hotkey Beeper Control
The Beeper can be hotkey toggled On and Off. To toggle the
Beeper, do the following:
1. Invoke HSM (see p. 10).
2. Press and release the B key.
The Beeper toggles On or Off. The Command Line displays
Beeper On or Beeper Off for one second; then the message
disappears and you automatically exit Hotkey Mode.
Disable Port Switching Keys
To disable the Port Switching Keys ([Scroll Lock] [Scroll Lock] /
[Ctrl] [Ctrl]), do the following:
1. Invoke HSM (see p. 10).
2. Press [X] [Enter].
Note: This procedure is a toggle. To enable the Port Switching
keys repeat steps 1 and 2.
- 12 -
2004-06-10