Filter
Top Products
CS82U / CS84U User Manual
6
No. Component Description
1Port
Selection
Pushbuttons
For manual port selection:
Press and release a port selection pushbutton to bring the
KVM focus to the computer attached to its corresponding
port. The Port LED lights bright orange.
Press and hold port selection pushbutton 1 and 2 for more
than 2 seconds to start Auto Scan Mode, see page 16 for
details.
Press and release either port selection pushbutton (1 or 2)
to stop Auto Scan Mode. The KVM focus goes to the com-
puter attached to the corresponding port of the switch you
pressed.
Press port selection pushbuttons 3 and 4 simultaneously
for 2 seconds to perform a keyboard and mouse reset
(CS84U only).
2 Port LEDs The Port LEDs are built into the Port Selection Switches.
KVM
Lights DIM ORANGE to indicate that the computer
attached to the corresponding port is up and running (On
Line).
Flashes to indicate that Firmware Upgrade mode is in
effect.
Changes to BRIGHT ORANGE to indicate that the com-
puter attached to its corresponding port is the one that has
the KVM focus (Selected).
Flashes to indicate that the computer attached to its corre-
sponding port is being accessed under Auto Scan mode.