Filter
Top Products
CS82U / CS84U User Manual
20
Hotkey Buzzer Control
The Buzzer can be hotkey toggled on and off. To toggle the Buzzer, do the
following:
1. Invoke HSM (see page 17
).
2. Press and release [B].
The Buzzer toggles on or off.
Disable Port Switching Keys
To disable the Port Switching Keys ([Scroll Lock] [Scroll Lock] / [Ctrl] [Ctrl]),
do the
following:
1. Invoke HSM (see page 17).
2. Press [X] [Enter].
Note: This procedure is a toggle. To enable the Port Switching keys repeat
steps 1 and 2.
Firmware Upgrade Mode
To set the CS82U / CS84U to Firmware Upgrade Mode, do the following:
1. Invoke HSM (see page 17).
2. Key in: upgrade
3. Press [Enter].
All front panel LEDs (green and orange) flash to indicate Firmware
Upgrade Mode is in effect.
Note: To exit Firmware Upgrade Mode, you must power off the switch.
Restore Default Settings
To reset the CS82U / CS84U to its default hotkey settings, do the following:
1. Invoke HSM (see page 17).
2. Press [R] [Enter].
See Hotkey Default Settings, page 37