Filter
Top Products
- 17 -
CEC Commands
Consumer Electronics Control (CEC) allows interconnected HDMI
devices to communicate and respond to one remote control. The formula
for CEC mode selection commands is as follows:
CEC Command + Output Command + Port Number + Control
(Off / On) [Enter]
For example, to enable CEC function on output port 1, type the following:
cec o01 on [enter]
The following tables show the possible values for commands:
Note: Each command string can be separated with a space.
The following table shows the available command list:
Command Description
cec CEC control
Output Command Description
o Output command
Port number Description
yy 01-08 port (default is 01)
* All output ports
Control Description
off Disable CEC (default)
on Enable CEC
Command
Output
Port
Control Enter Description
cec yy
*
off [Enter] CEC off for output port yy (default)
(yy:01~08, *)
cec yy
*
on [Enter] CEC on for output port yy
(yy:01~08, *)