Filter
Top Products
- 18 -
Panel Button Control Commands
The formula for Panel Button commands is as follows:
Panel Button Command + Control + [Enter]
For example, to enable the front panel pushbuttons, type the following:
button on [Enter]
The following tables show the possible values for commands:
The following table shows LED behavior under this command:
Command Description
button Front panel pushbutton enable/
disable control
Command Control Description
button on Enable front panel pushbuttons
(default)
button off disable front panel pushbuttons
Buttons Disabled Buttons Enabled
All output on LEDs flash every second LEDs on
All output off No LEDs No LEDs
Output on and Off On – flash every second;
Off – no LEDs
On – LEDs on; Off –
LEDs off