Filter
Top Products
12 Input and Output Adapters
Turning on the System
If you have properly installed your graphics card, operating system messages
will appear once the boot procedure is finished.
Your monitor will be running in a basic video mode. Higher refresh rates are
not available at this stage of the installation. Once you have installed the All-
in-Wonder® X1900 drivers and software, you can use the Display Properties
control panel to adjust the video settings and configure multiple monitors.
Input and Output Adapters
Your All-in-Wonder® X1900 uses input and output adapters that let you
connect audio and video devices to the card (for example, TV, VCR, or
camcorder).
This section outlines the configuration to use for a variety of situations.
Watching or Recording Movies on a PC
and Recording from a VCR or Camcorder
Use the ATI input adapter to connect a VCR or camcorder to your All-in-
Wonder® X1900 card, as shown.
L
WARNING - Turn on your monitor before you turn on your
computer. Failure to do so could damage your monitor.
L
Your All-in-Wonder® X1900 card uses a digital audio path. The card’s
audio output does not require a separate connection to your sound card to
hear the audio accompanying your video output.