Filter
Top Products
NetServer Pro
14
4 WLAN
Steady light confirms that the print server
has a good connection to your wireless
network.
When it blinks (briefly dark), the print
server is receiving/ transmitting data
from/to the wireless network.
1.6 The Rear Ports
Port Meaning
1 LAN The NetServer’s Pro rear panel features
an RJ-45 connector for connections to
10Base-T Ethernet cabling or 100Base-
TX Fast Ethernet cabling.
2 USB There is a fast USB connector located on
the rear panel of the NetServer Pro,
providing connection for one Printer.
3 POWER (jack) Connect the supplied power adapter to
this jack.
4 RESET Press this button for 10 seconds to
restore factory default setting.
1.7 Default Settings
Before you configure the NetServer Pro, you need to know the following
default settings:
Username:
Password :
IP address : 192.168.0.1