Filter
Top Products
NetServer Pro
20
1.10 Web Configuration
You can access and manage the NetServer Pro through: 1) the enclosed
software PS-Utility, and 2) a web browser. This chapter describes the
second method – the Web Configuration Utility, and explains how to set
up your print server with the web browser.
First, launch your web browser (such as the Internet Explorer 6.0 used in
this manual). Then, type http://192.168.0.1 (the default IP address) in the
Address bar and press [Enter] to enter the Management screen of the
Configuration Utility.
The computer’s IP address must correspond with
the print server’s IP address in the same
segment for the two devices to communicate.
Extensive knowledge of LAN will be helpful in
configuring the print server.