Filter
Top Products
NetServer Pro
28
Connection Mode: You can select two connection mode:
¾ Infrastructure:
Connects to compatibly configured
wireless AP or router in a WLAN.
¾ Ad-Hoc:
Connect to compatibly configured wireless
clients in the peer-to-peer mode.
SSID: Assign the SSID in this box. You can manually input the
name or select one from the pull-down menu. To search the
available wireless AP within the network, click the Site Survey
button.
Wireless Channel: Select the channel from the pull-down menu.
The default setting is 11. (Enable only in Ad-Hoc
connection
mode).
Transmission Rate: Select the data transmit rate from the pull-
down menu. The default setting is Fully Automatic.
Encryption:
This field allows you to configure the settings of data
encryption for NetServer Pro’s wireless interface; it support WEP (64 or
128 bits) and WPA-PSK.
Disable: Disable wireless network security
WEP Encryption: This option allows you to select WEP
alghorithm for data encryption.
¾ Length:
Select the length of WEP keys (64 bits or 128
bits).
¾ Format: You can decide the network key to be encoded
by ASCII (ASCII characters) or HEX (hexadecimal
digitals).
¾ Key 1-4: Insert WEP keys.
¾ Encrypt Data Transmissions Using:
Select which key
will be use by NetServer Pro for data encryption.
¾ Authentication Type: Select authentication type for
wireless interface (Open System, Shared Key or Both)
WPA-PSK: This option allows you to select WPA-PSK alghorithm
for data encryption.
¾ Preshared Key: Insert WPA-PSK Preshared Key.