Filter
Top Products
NetServer Pro
17
1.9.1 Installing PS-Utility
Follow the procedure outlined below to install PS-Utility:
1. Insert the NetServer Pro’s Installation CD into the CD-Rom drive.
2. Click Install Utility from the Auto-Run menu screen.
3. Once executed, the Setup program will extract files to launch the
InstallShield Wizard; then, follow it step by step to complete the
installation process
After installing the utility, the application program for NetServer Pro is
automatically installed to your computer, and creates a folder in
Start\Programs\PS-Utility. Now, you can begin using PS-Utility.
To avoid the conflict in your network, you can use PS-
Utility to change the related settings of your print
server (such as the IP address) after finishing the
installation.
1.9.2 Launching PS-Utility
To launch PS Utility:
1. Click Start -> Programs -> PS-Utility, and then click the PS-Utility
v3.11 item.
2. The main screen will appear as below, and it starts to search the
connected print server within the network.