Filter
Top Products
ENGLISH
DiskMaster 44
Select the format mode ((Individual Disks , RAID0, RAID1 or JBOD) and
Format type(EXT2, EXT3) from the drop-down menus. The available
options are listed as below. After making your selection, click Next to
continue.
A new message pops up to make you aware of the data loss resulting in
this action. Click OK to continue. The system starts to format the hard
disks. When the format is complete, click Finish.
If only one drive is installed, the RAID configuration will
not be available.
Creating the RAID system will take several hours,
depending on HDD capacity. Do not turn off the power or
interrupt the system in any other way during this process!
We recommend using the EXT2 file system for optimum
performance and functionality. Changing the RAID setup
will require you to re-format the drives. Make sure you
backup all data before doing so!