Filter
Top Products
© 2008 • All rights reserved. 15
DLA2/4/6 Speaker Level Audio Router
IR EMITTER OUTPUTS
Three IR Emitter outputs are provided for controlling components such as A/V Receivers, DVD
Players, CD Players, Digital Music Servers, etc. Any IR signal received by a Room IR INPUT will
be sent out of ALL of the IR EMITTER OUTPUTS.
A/V Receiver
Satellite
DVD
IR
Mini-Emitters
DLA2/4/6
IR
Mini-Emitters
IR EMITTER OUTPUTS
Figure 3-3: IR EMITTER OUTPUTS
ROOM IR INPUTS
IR Receiver Connections
The DLA2/4/6 features an IR Receiver Input for each room. To facilitate IR control of each
room, connect a standard IR receiver (such as ATON’s AIR1, AIR3, AIR5 and/or AIR6) to these
inputs as shown in Figure 3-4. Each IR receiver will send IR signals to the DLA2/4/6 and control
the room it is connected to.* Cat-5 cable can be used to extend the length of the IR receiver’s
connecting cable. Provisions exist for IR, Ground, and Voltage.
IR Input
AIR3
(or other ATON
IR Receiver)
Splice to Cat-5 Wire
Red (+12V)
Black (G)
Yellow (N/C)
White (IR)
Wh/Green (+12V)
Brown (G)
Wh/Blue (IR)
Cat-5
Figure 3-4: IR Receiver Connections
* System-wide control from one IR receiver location is possible using DLA discrete IR codes.
See Appendix C-3.