Filter
Top Products
TMA; Reviewed:
SPOC 7/21/2008
Solution & Interoperability Test Lab Application Notes
©2008 Avaya Inc. All Rights Reserved.
11 of 21
ProCurve-ACM
9. Set priority for telephony ports.
• Set the port QoS priority of the Avaya Modular Messaging Message Storage Server to 6.
• Set the port QoS priority of the Avaya Modular Messaging Messaging Application Server
to 6.
• Set the port QoS priority of the Avaya SIP Enablement Services to 6
• Set the port QoS priority of Avaya Communication Manager to 6
ProCurve Switch 5406zl# configure
ProCurve Switch 5406zl(config)# interface a4
ProCurve Switch 5406zl(eth-A4)# qos priority 6
ProCurve Switch 5406zl(eth-A4)# exit
ProCurve Switch 5406zl# configure
ProCurve Switch 5406zl(config)# interface a5
ProCurve Switch 5406zl(eth-A5)# qos priority 6
ProCurve Switch 5406zl(eth-A5)# exit
ProCurve Switch 5406zl# configure
ProCurve Switch 5406zl(config)# interface a10
ProCurve Switch 5406zl(eth-A10)# qos priority 6
ProCurve Switch 5406zl(eth-A10)# exit
ProCurve Switch 5406zl# configure
ProCurve Switch 5406zl(config)# interface a21
ProCurve Switch 5406zl(eth-A21)# qos priority 6
ProCurve Switch 5406zl(eth-A21)# exit
10. Save the running configuration to the startup configuration.
ProCurve Switch 5406zl# configure
ProCurve Switch 5406zl(config)# write memory
6. Configure Lab-A ProCurve 3500yl-24G-PWR Switch
This section addresses configuring the ProCurve 3500yl-24G-PWR Switch. The ProCurve
3500yl-24G-PWR Switch is used as the Lab-A Layer 2/ Layer 3 router, enforces QoS policies,
and supports link aggregation, OSPF and spanning tree.
To configure the ProCurve 3500yl-24G-PWR Switch, connect a PC or laptop to the serial port of
the ProCurve 3500yl-24G-PWR Switch. Run a terminal emulation program with the following
configuration:
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None