Filter
Top Products
TMA; Reviewed:
SPOC 7/21/2008
Solution & Interoperability Test Lab Application Notes
©2008 Avaya Inc. All Rights Reserved.
17 of 21
ProCurve-ACM
2. Enable the following features on the ProCurve 2610-24-PWR Switch.
• Enable spanning tree.
• Set DSCP map setting for priority 6.
• Set QoS type of service.
• Create trunk trk1 using link aggregation. Trunk trk1 goes to the ProCurve 5406zl Switch.
ProCurve Switch 2610-24-PWR# configure
ProCurve Switch 2610-24-PWR# spanning-tree
ProCurve Switch 2610-24-PWR# qos dscp-map 101110 priority 6
ProCurve Switch 2610-24-PWR(config)# qos type-of-service diff-services
ProCurve Switch 2610-24-PWR(config)# trunk 1-2 trk1 lacp
3. Create and configure the voice VLAN that will run between the control room and the closets.
• Assign a VLAN ID for the voice VLAN.
• Assign a name for the voice VLAN.
• Assign ports to the voice VLAN.
• Assign a QoS priority to the voice VLAN.
ProCurve Switch 2610-24-PWR(config)# vlan 33
ProCurve Switch 2610-24-PWR(vlan-33)# vlan 33 name Voice1
ProCurve Switch 2610-24-PWR(vlan-33)# tagged 3,4,24,trk1
ProCurve Switch 2610-24-PWR(vlan-33)# qos priority 6
ProCurve Switch 2610-24-PWR(vlan-33)# exit
4. Create and configure the data VLAN that will run between the control room and the closets..
• Assign a VLAN ID for the data VLAN.
• Assign a name for the data VLAN.
• Assign ports to the data VLAN.
ProCurve Switch 2610-24-PWR# configure
ProCurve Switch 2610-24-PWR(config)# vlan 30
ProCurve Switch 2610-24-PWR(vlan-30)# vlan 30 name Datavlan1
ProCurve Switch 2610-24-PWR(vlan-30)# untagged 3,4,15
ProCurve Switch 2610-24-PWR(vlan-30)# tagged 24,trk1
ProCurve Switch 2610-24-PWR(vlan-30)# exit
5. Save the running configuration to the startup configuration.
ProCurve Switch 2610-24-PWR# configure
ProCurve Switch 2610-24-PWR(config)# write memory