Filter
Top Products
Avaya P120 SMON User Guide 34
Alarms and Events
Select Port The Select Port screen of the Alarm Wizard allows you to select ports and
LAGs to be monitored by the Alarm.
Figure 6-4. Alarm Wizard - Select Port
The ports and LAGs on the device are listed in the
Device Ports list.
To select ports and LAGs to monitor, double-click a port or LAG in the
Device Ports list. The selected port or LAG appears in the Selected Ports list.
To remove ports or LAGs from the
Selected Ports list, double-click a port or
LAG in the
Selected Ports list. The selected port or LAG is removed from the
Selected Ports list and appears in the Device Ports list.
To define an Alarm for the entire device, add
Device to the Selected Ports
list.
When defining an Alarm for more than one port, a separate Alarm is
created for each port.
* Note: A maximum of 150 Alarms can be defined on a device.
When you finish selecting ports and LAGs to monitor, click
Next. The
Alarm Wizard continues with the Select Interval and Counter screen.