Filter
Top Products
Chapter 11 Avaya P330 Layer 2 Features
Avaya P332G-ML User’s Guide 89
MAC Aging
Overview
The MAC Aging feature allows the user to configure a time interval after which
unused entries in the MAC Table will be deleted.
Configuring the P330 for MAC Aging
This section describes the configuration of the P330 for the MAC Aging
functionality.
• MAC Aging is configured on the stack level.
• MAC Aging can be globally enabled/disabled using the set mac-aging
command.
— After firmware upgrade to version 4.0, MAC Aging default state is disabled.
— After NVRAM INIT, MAC Aging default state is enabled.
• “mac-aging-time” is set in minutes:
— Default=5 minutes
— Minimum time=1 minute; maximum time= 3600 min
In order to... Use the following command...
Enable/Disable MAC security for
the switch
set security mode
Display the MAC security mode for
the switch
show security mode
Enable/Disable MAC security for a
specific port
set port security
Display the MAC security mode for
a port
show port security
Specify the action taken when there
is a security violation
set security violation action
Add a MAC address to a port’s list
of allowed MAC addresses
set secure mac
Remove a MAC address from a
port’s list of allowed MAC addresses
clear secure mac
Display a port’s list of allowed MAC
addresses
show secure mac