Filter
Top Products
Chapter 10 Switch Configuration
70 Avaya P332G-ML User’s Guide
Syslog Configuration CLI Commands
Use the CLI commands briefly described below for configuring System Logging.
The rules of syntax and output examples are all set out in detail in the Reference
Guide.
In order to... Use the following command...
Enable or disable logging for the
current session
set logging session {enable |
disable}
Display the logging configuration
for the current session
show logging session condition
Define the IP addresses of the
Syslog servers
set logging server
Enable or disable logging for a
Syslog server
set logging server {enable | disable}
Update the server facility
parameter of a configured Syslog
server
set logging server facility
Defines the access level associated
with a Syslog server sink.
set logging server access-level
Display the logging configuration
for the specified Syslog server or for
all servers
show logging server condition
Enable or disable logging to a file
on NVRAM
set logging file {enable | disable}
Define a filter rule for logging
messages to a file
set logging file condition
Delete the log file and open an
empty log file
clear logging file
Outputs the messages logged in the
log file to the CLI console. The
output is arranged in descending
order of occurrence, with the most
recent events first.
show logging file content