Filter
Top Products
Chapter 10 Switch Configuration
Avaya P334T-ML User’s Guide 67
Download a startup configuration
file to the device using TFTP (only
applicable when the device mode is
Layer 2)
copy tftp startup-config
Note:To use the startup
configuration file, run the
copy running-config
starting-config command
after the configuration file is
downloaded to the device.
Download a module configuration
file to the device using TFTP
copy tftp module-config
Download a stack configuration file
to the device using TFTP
copy tftp stack-config
Download embedded software
using TFTP
copy tftp sw_image
Download embedded Web
software using TFTP
copy tftp ew_archive
Download PoE software using
TFTP
copy tftp sw_powerinline_image
Upload the startup configuration
file from the device using SCP (only
applicable when the device mode is
Layer 2)
copy startup-config scp
Upload a module configuration file
from the device using SCP
copy module-config scp
Upload a stack configuration file
from the device using SCP
copy stack-config scp
Upload the running configuration
file from the device using SCP (only
applicable when the device mode is
Layer 2)
copy running-config scp
Upload the startup configuration
file from the device using TFTP
(only applicable when the device
mode is Layer 2)
copy startup-config tftp
In order to... Use the following command...