Filter
Top Products
36
CONTENTS
3.2 INSERTING LABEL MATERIAL
ALS
20x
256
GB
Threading the label roll onto the drive
roller
£ Open the pressure roller. To do so, rotate the lever
[37D] in a clockwise direction.
£ Feed the backing paper around the deflection roller
[37B], drive roller [37C] and the dancer arm [37A].
£ Close the pressure roller. To do so, rotate the lever
until it snaps in noticeably.
Fastening the label roll to the rewinder
£ Clamp the backing paper to the rewinder as shown
and tighten it [39].
£ Manually rotate the rewinder by one turn.
[37] Open the pressure roller.
[38] Close the pressure roller.
C
D
B
A
[39] Fastening the backing paper to the rewinder.