Filter
Top Products
62 DSR Switch Installer/User Guide
P
Point-to-Point Protocol 5
Position Flag 25
POWER LED 10
PPP 5
Print Screen 15
OSCAR interface 17
procedure
To access the OSCAR interface Broadcast
dialog box
25
To access the OSCAR interface Commands
dialog box
33
To access the OSCAR interface Devices
dialog box
21
To access the OSCAR interface Flag dialog
box
24
To access the OSCAR interface Menu dialog
box
22
To access the OSCAR interface Names
dialog box
19
To access the OSCAR interface Screen Saver
dialog box
30
To access the OSCAR interface Setup dialog
box
17
To add a user to the DSR switch database 42
To add target devices to the scan list 27
To adjust mouse settings
on Windows 2000 11
on Windows XP 11
using IntelliPoint drivers 11
using Red Hat Linux drivers 12
using Sun Solaris drivers 12
To adjust mouse settings on Windows NT 10
To assign a device type 21
To assign names to target devices 20
To broadcast to selected target devices 26
To cancel scan mode 29
To choose the display order of target devices
23
To configure a DSRIQ-SRL module 50
To configure network settings using the
Console menu
39
To configure the OSCAR interface screen
delay
15
To connect a DSRIQ module to a serial
device
9
To connect a DSRIQ module to a server 9
To connect and power up your DSR switch 8
To create a DSRIQ-SRL module macro 50
To determine how the Status flag is displayed
25
To disconnect a user 34
To disconnect from a target device 15
To display version information 36
To exit screen saver mode and log in to the
local port
31
To immediately turn on the screen saver 31
To list target devices alphabetically by name
20
To remove a target device from the scan list
28
To remove a user from the DSR switch
database
43
To rename a user in the DSR switch database
42
To reset the PS/2 mouse and keyboard values
35
To select target devices 14
To select the previous target device 14
To set a Screen Delay Time for the OSCAR
interface
23