West Bend Back to Basics UX-CC500 Fax Machine User Manual


 
Problems and Solutions
113
10. Trouble-
shooting
The battery does not
charge.
Make sure the cordless handset is placed in the
charger with the dial pad facing forward.
Make sure the AC adapter is connected correctly to
the charger and the power outlet (see page 17).
Wipe the charger contacts with a cotton swab.
Make sure the battery is properly connected inside
the cordless handset (see page 18).
The battery may need replacement (see page 106).
You hear noise or
interference during a call.
Make sure the base antenna is fully upright on the
fax machine (see page 17).
Other electrical appliances may cause interference.
Move away from any electrical appliances.
Move closer to the fax machine. Note that large
metal objects, metal structures, and thick walls
between the fax machine and cordless handset will
reduce the talking range. If needed, try moving the
fax machine to a different location.
You hear beeps during a
call.
You will hear beeps during a call and LOW
BATTERY will appear in the display if the battery is
low. Place the cordless handset in the charger and
let it recharge. If you hear beeps during a call and
need to continue the call, press the INTERCOM
key to transfer the call to the fax machine.
You will hear beeps during a call and OUT OF
RANGE will appear in the display if you are outside
of the talking range. Move closer to the fax
machine.
When you press the
INTERCOM key, the name
of one of the other
cordless handsets does
not appear in the list (only
the number appears),
even though a name has
been programmed for that
cordless handset.
The name was not transmitted to your cordless
handset when it was entered (probably because
your cordless handset was in use). To retransmit
the name, repeat the name entry procedure on
page 20. The name will automatically appear in the
display in Step 6, so simply press to
transmit the name then exit the procedure with Step
8.
START/MEMORY