Filter
Top Products
4 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide
NK==fåíêçÇìÅíáçå
About the MatrixPRO
^Äçìí=íÜÉ=j~íêáñmol
The MatrixPRO 16x16 digital router is available in HD-SDI or SD-SDI versions:
• The HD-SDI router can route HD-SDI, adhering to SMPTE 292 or SD-SDI signals
adhering to SMPTE 259.
• The SD-SDI router adheres only to SMPTE 259.
Both versions of the MatrixPRO 16x16 digital router provide 16 inputs and 16 outputs, and
allow any input to be routed to any output (or group of outputs). The 8x router provides
eight inputs and eight outputs.
MatrixPRO is an ideal switcher to provide professional-quality serial digital video signal
routing. The operator can save up to eight "presets" from the front panel, and eight with the
MatrixPRO Control GUI. Typical applications include live staging events, corporate
boardroom presentations, and educational and training events. Remote control operation
is available over RS-232, RS-485 and Ethernet.
To ensure trouble-free operation, please follow all procedures in the Installation and
Operation sections of this manual. Refer to Chapter 2, “Hardware Installation
” and
Chapter 3, “Operation” for details.
Should you have any questions regarding the operation of this unit, please consult the
factory. Refer to Appendix C, “Contact Information” section for information.
cÉ~íìêÉë
The MatrixPRO 16x16 digital router includes the following features:
• HD-SDI architecture allows routing of digital serial video streams, adhering to
SMPTE 292.
• SD-SDI architecture routes video adhering to SMPTE 259.
• Enable/disable reclockers are provided on the outputs.
• IP (Ethernet) control is standard, (a static IP address is required.)
• Front Panel Lockout Mode is provided.
• Memory Presets save individual I/O configurations for recall via the front panel or
RS-232/485.
• I/O Grouping allows specific inputs and outputs to be grouped together making
installation and control easier.
• The system’s vertical interval switching capability provides glitch-free switches
when used with synchronous video sources. The source for vertical switching will
be channel 1 input.
• A MatrixPRO Control Software GUI is provided for setup and control via serial
commands or Ethernet control.
• The optional MatrixPRO Remote Control Panel is available for remote operation
via RS-485.