Filter
Top Products
MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide 37
4. GUI Installation and Operation
GUI Operation
sáÇÉç=pïáíÅÜáåÖ=q~Ä
Use the following steps to utilize the Video Switching Tab:
1. Click on the Video Switching Tab on the GUI page. A sample tab is shown
below.
Figure 4-5. Video Switching Tab (sample)
2. Select input 1 by clicking once on it. The input "key" turns yellow. Click on the
"key" a second time to de-select it.
3. Select an Output channel (e.g., Output 1). The Output "key" turns white indicating
that a video route has been selected. To the right of the Output "key" in the Video
column, a red box appears in which the Input channel assignment is listed. The
red color indicates that a route is pending. Please note:
~ On the front panel of the MatrixPRO, the Output channel will be steadily
illuminated while the Input key will start blinking. This also is an
indication that a route is pending.
4. Click the Take key on the GUI page. The red box in the Video column turns green
indicating a completed route. The front panel Input key will be steadily
illuminated. Please note:
~ The Video Switching page mimics the MatrixPRO front panel — in that
the user must click on a given input channel "key" in order to see the type