Barco 32X32 Printer User Manual


 
MatrixPRO- II 29
LCD APPEARANCE SETUP
FRONT PANEL SETUP brings up the following screen:
ESCAPE
SELECT
FRONT PANEL SETUP
CONTRAST>
BACKLIGHT 100%
44
This screen allows adjustment of the CONTRAST and BACKLIGHT on the LCD display, .
CONTRAST deals with the difference in shade between the characters and the background, the
higher the number the bigger the difference.
DELAY TIME
DELAY TIME sets the RGB time delay for all RGB outputs. This is a global setting. RGB delay is
independently enabled or disabled via the output setup for any given RGB output.
The time range is .1 to 10.0 seconds with 00.0 indicating off. Each RGB output’s setup has the
ability to turn on or off RGB delay. The user will position the cursor using UP or DOWN buttons to
DELAY TIME and presses SELECT. The user then uses the UP and DOWN buttons to set the delay
time to the correct seconds, and tenths of seconds. Pressing the SELECT button then sets and stores
the delay time setting.
PRESET SETUP MENU PAGE
All MatrixPRO-II models have 32 presets. Presets are accessed on the front panel either by pressing
an input or output select button, or using the UP and DOWN buttons and SELECT to choose a
preset not represented by an input or output button. For example if the matrix is a 12X8 matrix, only
presets 1 to 20 can be accessed using an input or output button. Presets 21 to 32 will need to be
accessed using the UP, DOWN and SELECT buttons. Preset numbers accessed by the input and
output buttons are determined by the button they are associated with. For example; on a 12 X 8
matrix output, button 3 would represent preset 15, output button 8 would be preset 20.
The user can set presets by using the SETUP PRESET function. The user can set a preset in two
ways; saving the current output matrix settings to a preset, and de ning a preset based on selected
outputs.