Barco 32X32 Printer User Manual


 
30 MatrixPRO- II
The screen for the preset setup will look like this:
ESCAPE
SELECT
PRESET SETUP
PRESET NUMBER
SAVE ALL OUTPUTS
SAVE SELECTED
>
The user can choose a preset number either by pressing an input or output button or using the UP,
DOWN and SELECT buttons. If the user wishes to save the current settings as the preset, the user
will position the cursor to SAVE ALL OUTPUTS and presses SAVE.
To only include certain outputs into the preset, the user will select SAVE SELECTED, then choose
the outputs (using the output buttons) that are to be included in the preset. If the output is not
split, the user will have the option of selecting VIDEO, AUDIO or both by pressing the VIDEO
and AUDIO buttons.. The following screen will be displayed to allow the user to con rm that the
settings are correct and to select video and/or audio.
If the settings are correct the user will press SELECT and this output will be saved locally until
the ESCAPE button is pressed. When nished selecting outputs the user will press ESCAPE and
is prompted to save the preset. If the user presses SELECT at the YES prompt, the preset will be
saved to the main unit.
ESCAPE
SELECT
SELECTED PRESET
OUTPUT NUMBER
OUTPUT NUMBER
VID/AUD
'SELECT' SAVES
01
OUTPUT TO PRESET
CHOOSE
THEN
THEN