Barco 32X32 Printer User Manual


 
MatrixPRO- II 37
ScreenPRO-II/ScreenPRO-II CONTROLLER SETUP
Con guring the ScreenPRO-II
The ScreenPRO-II is con gured with an IP address compatible with the ScreenPRO-II controller.
The address is 192.168.0.244. The IP port address is also con gured to Port 23. No other
con guration is necessary.
Setting Up the ScreenPRO-II Controller
To set up the Controller to recognize the ScreenPRO-II the user starts at the main controller screen
and will select ‘SYSTEM’. The main screen with the ‘SYSTEM’ button is shown below:
The user will touch the ‘SYSTEM’ button on the controller which will then bring up the ‘SYSTEM
MENU’ the user would then press the ‘ROUTER SETUP’ button. The ‘SYSTEM MENU’ with
the ‘SYSTEM MENU’ button highlighted is shown below: