Filter
Top Products
6. Configuration schemes
6. CONFIGURATION SCHEMES
6.1 Stand alo ne configuration
Scheme
Image 6-1
One D320L Digitizer is sufficient to drive one Barco LED wall with four different sources.
How to set up a D 320L stand alone configuration
1. Connect the RS232 communication port of the local control PC
with the COM1 RS232 input port of the
D320L Digitizer.
2. Connect the LED-WALL OUTPUT from the D320L Digitizer with the display.
3. Provide the available video sources to the D320L input modules.
4. Configure the D320L Digitizer and the Display with the control software installed on the local control
PC.
6.2 Chain ing configuration
Scheme
Image 6-2
R5976542 D320L DIGITIZER 15042003 21