Filter
Top Products
6. Configuration schemes
How to set up a D320L stacking configuration
1. Connect the RS232 communication port of the local control PC with the COM1 RS232 input port of the
first D320L Digitizer. This Digitizer will act as the master, all following Digitizers are slaves.
2. Connect the LOOP OUT with the LOOP IN of the next stacked D320L Digitizer. This is necessary to
avoid synchronization problems between the screens
3. Connect t he COM3 RS232 output port with the COM1 RS232 input port of the next stacked D320L
Digitizer.
4. Connect the LED-WALL OUTPUT with the one screen.
5. Repeat step 2, 3 and 4 until all D320L Digitizers are stacked.
6. Provide the available video sources to the input modules of one of the D320L Digitizers and use the
active loop through to connect the sources with the other stacked D320L Digitizers. Make sure the
same input source is used for the same input slot number on the different Digitizers.
7. Configure the D320L Digitizers and the Display with the control software installed on the local control
PC.
6.4 Com bined chained and stacked configuration
Scheme
Image 6-4
It is possible to stack several chained D320L Digitizers in order to create a larger display with more than
4 windows. On condition that each chain in the stacked configuration has the same number of D320L
Digitizers.
R5976542 D320L DIGITIZER 15042003
23