Filter
Top Products
Installation Adjustments
7-9
5975987A BARCODATA 708 260597
ADJUSTMENT MODE
source 1
Select with or
then <ENTER>
<EXIT> to return
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
IRIS
After finishing the installation adjustments procedure, the
'Path
selection'
returns on the screen. You are now able to start the
alignment procedure for the projector. You have the choice between:
- Guided Adjustment Procedure
- Random Access Adjustment Procedure
The result of both procedures will be the same. More explanation
about both procedures is given in the owners manual.
The following paragraph gives an overview of the image corrections.
Alignment of the projector.
Overview of the corrections
For detailed information about these corrections and procedures to
be followed, see owner's manual. (pages given hereafter are for the
random access adjustment mode)
Shift corrections for the Red, Green and Blue image.
Left-Right adjustments
- Vertical center line bow and skew
- Left and right keystone adjustment
- Left and right bow adjustment
- Horizontal size adjustment
Top-Bottom adjustments
- Horizontal centerline bow and skew
- Top keystone adjustment
- Top bow adjustment
- Bottom keystone adjustment
- Bottom bow adjustment
Size-linearity adjustments
- Horizontal size adjustment
- Vertical linearity adjustment
- Vertical size adjustment
- Horizontal phase adjustment
Convergence adjustments
- Green only
- Red on green
- Blue on green
Blanking adjustment
- Top-Bottom, Left-Right
Color adjustments