Filter
Top Products
28 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide
3. Operation
Control of Digital Video Switching
`çåíêçä=çÑ=aáÖáí~ä=sáÇÉç=pïáíÅÜáåÖ=======
Use the following steps to perform a switch:
1. Select an output channel (destination) from among the lower eight output buttons.
On the 16x only, use the SHIFT button adjacent to the Output Row to access
outputs 9-16 as required.
2. To select a new input source, press the desired key. On the 16x only, use the
SHIFT button adjacent to the Input Row to access inputs 9-16 as required. The
newly selected input key will blink.
3. Press Take. The newly selected input key will light steadily.
4. To de-assign an input from an output, press the desired output key. This key will
light, along with the currently assigned input channel.
5. Press and release the input key, which will begin to blink.
6. Press Take. The input channel key will go dark, indicating that the input has been
de-assigned and that output channel has been “blanked.”
Note
If an input is already associated with that output, the input key
will light. If there is no input channel associated with the
selected output, all input keys will be dark.
Note
To cancel the route before pressing Take, press ESC. The
previous input channel selection will remain in force.