Filter
Top Products
26-0904001-00 Rev 00.00 17
VFS
Description: Video Format Settings
Required parameters:
--con (connector) , for input video format
--och (output channel) , for output video format
--itype (input type) , for commands to DVI Input settings
Parameters:
--con (connector) : 0-5, see below for input connector numbers.
--och (output channel) : 0-1, for output commands
--itype (input type) : 0 = digital, 1 = analog
--new (new format name) : Use "" around the format name. Use
VFSTDLIST to get the standard format names. This command option
changes the format to "new format name".
--enum (new format enum) : Use VFSTDLIST to get the video format
numbers.
--reset (reset to default timing based from format table)
--name (format name) :This command option simply renames the
current format.
--hsync (horizontal sync)
--hact (horizontal active)
--hfp (horizontal front porch)
--hpos (horizontal position)
--htot (horizontal total)
--vsync (vertical sync)
--vact (vertical active)
--vfp (vertical front porch)
--vpos (vertical position)
--vtot (vertical total)
Connectors:
0=DVI
1=HD15
2=HDMI
3=DP
4=SDI1
5=SDI2 (available when Dual option mezzanine installed)
Query Format: VFS --?
Query Response: Video Format settings in the following format:
VFS --name "format name" --hsync (hsync) --hact (hact) --hfp (hfp) --htot
(htot) --vsync (vsync) --vact (vact) --vfp (vfp) --vtot (vtot)
VIDCOL
Description: Video Color Settings for Input / Output
Required parameters:
--con (connector) , for input video color
--och (output channel) , for output video color
--itype (input type) , for commands to DVI input settings