Filter
Top Products
26-0904001-00 Rev 00.00 18
Parameters:
--con (connector) : 0-
5, see below for connector numbers.
--och (output channel) : 0-1
--itype (input type) : 0 = digital, 1 = analog
--brt (overall brightness) : [50..150]
--cbrt (individual brightness) : [50..150]
--cnt (overall contrast) : [50..150]
--ccnt (individual contrast) : [50..150]
--col (color) (must be supplied for --cbrt or --ccnt parameters)
0 = all color
1 = red
2 = green
3 = blue
--sat (saturation) : [0..125]
--hue (hue) : [-90..90]
--cinv (color invert) : 0 = Normal, 1 = Inverted Color
--csp (colorspace) : 0 = RGB, 1 = YUV
--gamma (gamma) : 0.3 - 3.0
--mono (monochrome) : 0 = Normal, 1 = Monochrome
Query Format 1 (Input): VIDCOL --con (connector) --?
Query Response 1 : Video Color Settings in the following format
VIDCOL --brt (ovr bright) --cbrt (R bright) (G bright) (b bright) --cnt (ovr
contr) --ccnt (R contr) (G contr) (B contr)
--sat (saturation) --hue (hue) --cinv (invert) --csp (colorspace) --gamma
(gamma) --mono (monochrome)
Query Format 2 (Output): VIDCOL --och (output channel) --?
Query Response 1 : Video Color Settings in the following format
VIDCOL --brt (ovr bright) --cbrt (R bright) (G bright) (b bright) --cnt (ovr
contr) --ccnt (R contr) (G contr) (B contr)
--sat (saturation) --hue (hue) --cinv (invert) --csp (colorspace) --gamma
(gamma) --mono (monochrome)
Connectors:
0=DVI
1=HD15
2=HDMI
3=DP
4=SDI1
5=SDI2 (available when Dual option mezzanine installed)
VIEW
Description: View Settings
Required parameters:
--con (connector)
--ch (channel) , required for --percent or --pixel parameters
not required for --units or --save or --recall or --reset
Parameters:
--con (connector) :0-5, see below for input connector numbers.