Filter
Top Products
36
Operation and Settings
Option Menu
This menu is used for specifying settings for flipping images and screen displays.
Q denotes the factory default.
Setting Menu (Cont’d)
Main
Image
Setting
Convergence
Lens
Option
Network
Mail
Logout
host PJ-1
user: root
Flip
ON OFF
Back Color
Blue Black
Message Display
Horz.
ON OFF
Vert.
Lamp Power
SET
100% 100%
Test Pattern
SET
OFF OFF
OFF
Color Bars
Color Cross Hatch
Cross Hatch
Staircase
Ramp
Flat
ON OFF
Item Setting Value Description
Flip
Horz.
Vert.
ON
Q OFF
ON
Q OFF
For specifying settings if images are vertically or horizontally flipped
when they are projected from the opposite side of the screen, or when
mirrors are used for projection.
ON : Flips image horizontally.
OFF : Do not flip image horizontally.
ON : Flips image vertically.
OFF : Do not flip image vertically.
Lamp Power Q 100 %
to
80 %
For setting the brightness of the light source lamp.
NOTE:
● Brightness switches in about a step of 3 % between the 80 % to 100
% range.
Back Color Q Blue
Black
For specifying the background color during message display or when
projection fails, such as when there is no input signal.
Blue : Sets the screen to blue color.
Black : Sets the screen to black color.
Message
Display
Q ON
OFF
For specifying whether to display the messages.
ON : Displays the messages.
OFF : Do not display the messages.
Test Pattern Q OFF
Color Bars
Color Cross Hatch
Cross Hatch
Staircase
Ramp
Flat
For projecting the test pattern.
OFF : Do not display the test pattern.
Color Bars : Displays the color bar.
Color Cross Hatch : Displays the color cross hatch pattern.
Cross Hatch : Displays the cross hatch pattern.
Staircase : Displays the staircase.
Ramp : Displays the ramp pattern.
Flat : Displays the flat pattern.
LX-5_EN.book Page 36 Friday, July 4, 2008 9:35 AM