Filter
Top Products
Vesa-mount installation
45
Vesa-mount installation
Important:
• Use an arm that is approved by VESA (according to the VESA
100 mm standard).
• Use an arm that can support a weight of at least 25 kg (55.12
lbs).
To attach the panel unit to an arm stand:
1. Release the display panel from the display stand as follows:
• Remove the neck cover (1) by sliding it upward.
• Lift the plastic frame (2) that covers the fixation of the panel
to the stand. Turn it for 45 degrees to uncover the fixation
screws.
• Unscrew the four fixation screws fixing the panel to the stand.
1
2