Filter
Top Products
24
PGWX-62L/PGWU-62L/PGWX-62L-K/PGWU-62L-K - - 2015/03/06
4. User Controls
3.6 Safety Cover Installation
Procedure:
Align and hook the safety cover to the side of the projector, as shown in the illustration below.1.
Push the safety cover upwards until it locks into place.2.
Gently flip the projector over so that its bottom panel is facing up.3.
Fix the screws to secure the safety cover to the projector.4.
By installing a safety cover (optional part), the projector can be mounted vertically to display images in portrait
orientation.
Notes:
When the projector is in protrait orientation. The OSD will not be able to rotate accordingly and the lens y
shift will be same as table/ceiling installation direction.
To remove the safety cover, reverse the previous step. y