Filter
Top Products
Service Mode
7-7
5975977 BARCODATA 708 260597
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Deletion of all blocks
Highlight
'delete all blocks'
with the control disk and press ENTER.
ENTER gives a confirmation message before deleting.
EXIT returns to the Path Selection main menu.
If you are certain you wish to delete all blocks, press ENTER to
confirm, otherwise press EXIT to return.
Once
ENTER is pressed, all block headers and adjustment settings
are permanently removed and cannot be restored.
DELETE ALL BLOCK
All block
will be deleted !
<ENTER> to confirm
<EXIT> to cancel
All settings to midposition
Item is password protected.
Highlight
'All settings to midposition'
with the control disk and press
ENTER to set all settings to their midposition.
A confirmation menu will be displayed first.
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
ENTER displays a Confirmation screen.
EXIT returns to the Service menu.
SET TO MIDPOSITION
All settings
on current block
will be overwritten !
<ENTER> to confirm
<EXIT> to cancel
ENTER will set all settings to their midposition. EXIT will cancel the
operation to set all settings to their midposition.
Undo all settings to midpos
When "All settings to midpos" is selected, all settings are set to their
midposition. To cancel this action, select 'Undo all settings to
midpos' by pushing the control disk up or down and press ENTER.
'Undo all settings to Midposition' is displayed in the Memory man-
agement menu in stead off 'All settings to midposition' when this
latter is pressed.
An undo is possible as long as the projector is playing on the same
source (= same adjustment block) even when some adjustments as
geometry or convergence are already readjusted. When undo is
presssed all settings are reset to the previous settings.
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
UNDO ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID