Filter
Top Products
BARCO 11 Projection Systems
Assembling the LCD + X-CUBE Assembly
What has to be
done
The LCD + X-Cube assembly has to be re-assembled.
Necessary Tools Screwdriver 8 mm.
Nutdriver 5.5
Philips screwdriver
Necessary Parts New LCD + X-Cube
Tip Start with the last disassembled part and continue to the first one in the queu.
Assembling the
X-cube Assembly
To assemble the X-cube assembly, follow the next procedure:
1
2
3
4
5
1
2
3
Turn in the 4 spacers and insert the washers between the
spacers and the X-Cube.
Put the metal unit holder on its place.
Turn in the 4 fixing screws with a nutdriver or flat screw-
driver.
Put the adjustment unit on its place.
Secure this position with the 4 fixing screws (Philips
screwdriver).
Step Action Image
To be continued on next page.
Illustration
Image 1 Image 2
Image 3