Filter
Top Products
BARCO 13 Projection Systems
Mounting the LCD + X-CUBE
What has to be
done
The LCD + X-Cube has to be mounted in the projector.
Necessary Tools Screwdriver 5 mm.
Mounting the
LCD + X-Cube
1
2
1
1
Slide the LCD + X-cube with its frontside to the front of the
projector very carefully into the projector.
Secure both fixing screws down under by inserting a flat
screwdriver.
Step Action Image
To mount the LCD + X-cube, follow the next procedure:
Electrical
Connection of the
X-Cube.
Mounting the X-Cube, it must be electrically connected to the driver board. Follow the
next procedure:
1
2
Insert the cable into the connector.
Press very carefully on both sides of the
indicated points to lock.
Step Action Illustration
Press to lock
Press to unlock
Connector
connector
cable
Illustrations on
Top Cover
Removal
Cable connectors
Frontside LCD +
X-Cube