Filter
Top Products
BARCO 16 Projection Systems
Re-installing the covers and the lens (Continued)
Installing the
Lens
To installal the lens, follow the next procedure or look into the owners manual :
1
2
3
4
5
6
7
8
9
1
1
2
2
2
2
3
Take the lens out of its packing material.
Open the lens cover of the projector.
Loosen the fixation screws (B) and pivote the motor part
(A) up.
Open both lens locks (C) by pulling them backwards.
Put the lens on the lens holder with the tooht profile (D) (for
zoom lenses) to the upside.
Fix the lens by closing the both locks until they are se-
cured.
Pivote the motor part downwards. Ensure that the teeth of
the motor matches those of the tooth profile. If not, turn
the lens a little (for zoom lenses).
Secure the fixation screws (B).
Re-install the lens cover.
Step Action Image
Illustrations on
Removing the
Lens
Image 1
Image 2
Image 3