Filter
Top Products
Installation Set Up
4-1
5976069 BARCOREALITY 6400 21082000
4
INSTALLATION SET UP
Configuration
The projector can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling.
Front/Table
Front/Ceiling
Changing the configuration :
To change the configuration of the projector, proceed as follow :
Rear/Table
Rear/Ceiling
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
NO SIGNAL
LENS
Select with or
then <ENTER>
<EXIT> to return.
CONFIGURATION
FRONT/TABLE
FRONT/CEILING
REAR/TABLE
REAR/CEILING
1 Press ENTER to start up the adjustment mode.
2 Press the cursor key é or ê to select 'Installation'.
3 Press ENTER to display the Installation menu.
4 Press the cursor key é or ê to select 'Configuration'.
5 Press ENTER to display the Configuration menu. The actual installed configuration will be highlighted.
6 Press the cursor key é or ê to select the corresponding configuration.
7 Press Adjust to leave the adjustment mode.