Filter
Top Products
Source connections
7-4 5975607 BARCODATA 808s 170397
Connecting a RGB Analog source with Tri-
level sync to Port 4/5 (option)
RGB analog input terminals with Tri-level sync input or with Tri-level
sync on green can be connected to the projector via Port 4/5. The
projector detects automatically where the sync signal is located. This
feature requires an optional Tri-Level Sync Module - Order Number
R9828040.
To select the input :
Press the numeric button 7 on the RCU or the local keypad.
POW ER / MAIN S COMM. PORT PORT 3
PORT 4/5
PORT 2
PORT 1
PROJECTOR MODE
798
Peripheral equipment
Connecting a RCVDS 05 source selector to the
BARCOGRAPHICS 808s
Up to 20 inputs with a RCVDS05 and up to 90 inputs can be
accommodated when multiple RCVDS source selectors are linked
via a Expansion Module.
Serial communication with the projector.
Remote control buttons on the RCVDS05 to control the BARCO
GRAPHICS 808s (source selection and analog settings).
The selected source number will be displayed on a 2-digit display
and the selected input modules will be indicated with a LED on the
rear.
The order numbers for the RCVDS05 source selector :
RCVDS05 230 V R9827880
RCVDS05 120 V R9827889
For more information about the use of the RCVDS05, consult the
RCVDS05 Owner's Manual - order number : R5975765.
Connecting a VS05 source selector to the
BARCOGRAPHICS 808s
The VS05 can switch up to 5 Composite Video sources, 3 S-Video
Sources and 1 RGB analog or component Video source to the
BARCOGRAPHICS 808s. In addition, the audio signal associated
with the source, can be switched to an audio amplifier.
VS05 order number : R9827890.
For more information about the use of the VS05, consult the VS05
Owner's Manual - order number : R5975245.
Connecting an IR Remote Receiver 800 to the
BARCOGRAPHICS 808s
This infrared Remote Receiver makes it possible to control the
BARCOGRAPHICS 808s from another room. There is a communica-
tion cable between the IR Remote Receiver and the projector. The
control information from the RCU can now be sent to the IR Remote
Receiver 800. The IR Remote Receiver 800 displays the selected
source on a 7-segment display.
IR Remote Receiver 800 order number : R9827515.
POW ER / MAIN S COMM. PORT PORT 3
PORT 4/5
PORT 2
PORT 1
PROJECTOR MODE
798
Connecting a Component Video source with
Tri-level sync to Port 4/5 (option)
Component video inputs with Tri-level sync signal can be connected
to the projector via Port 4/5. The projector detects automatically
where the sync signal is located. This feature requires an optional Tri-
Level Sync Module - Order Number R9828040.
To select the input :
Press the numeric button 8 on the RCU or the local keypad.