Barco R9010000 Projector User Manual


 
9. Service Mode
9.5 Changing Language
Start up
1. Push the cursor key or to highlight Chang e Language. (menu 9-11)
2. Press ENTER to display the Change Language menu. (menu 9-12)
3. Push the cursor key or to highlight the desired language.
4. Press ENTER to change the language.
Available languages: English
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with or
then <ENTER>
<EXIT> to return
Menu 9-11
CHANGE LANGUAGE
ENGLISH
Select with or
then <ENTER>
<EXIT> to return
Menu 9-12
9.6 Change Projector Address
How to change the projector address?
1. Push the cursor key or to highlight Change Proj Address. (menu 9-13)
2. Press ENTER.
The Change Projector Address menu will be displayed and the actual address will be filled in. (menu 9-14)
3. Push the cursor key or to highlight Projector a ddress .
4. Press ENTER to activate.
The first digit will be highlighted.
5. Reprogram the address with ,,, keys
Use the or key to select a new value, use the or key to select a new digit.
Or,
use the numeric keys on the RCU to enter the new address.
The address must be between 0 and 9 when controlling the projector with the RCU or
between 0 and 255 when controlling the projector via RS232.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with or
then <ENTER>
<EXIT> to return
Menu 9-13
CHANGE PROJ. ADDRESS
PROJECTOR ADDRESS 1
COMMON ADDRESS (RC5) 0
COMMON ADDRESS (PPM) 0
Select with or
then <ENTER>
Reprogram with ,,,
or numeric keys
<ENTER> to confirm
<EXIT> to return.
Menu 9-14
How to change the common address
1. Push the cursor key or to highlight Change Proj Address. (menu 9-15)
2. Press ENTER.
The Change Projector Address menu will be displayed and the actual address will be filled in. (menu 9-16)
3. Push the cursor key or to highlight Common address.
R5976562 BARCOSLM G10 PERFORMER 20/10/2004
105