Filter
Top Products
3. Installation Guidelines
Necessary tools
Flatblade screwdriver of 5mm or Nut driver 8mm
Installing the lamp unit
1. Remove the lock nut on the 3 spacer screws (A). (image 3-9)
2. Line up the lamp unit guides with the guides on the projector frame (B) and push the unit into the frame until it fits. (image 3-10)
3. Secure the position of the lamp unit with the 3 spacer screws. (image 3-11)
Image 3-9
Lamp unit, removing the lock nuts
18 R5976562 BARCOSLM G10 PERFORMER 20/10/2004