Filter
Top Products
7. Random Access Adjustment Mode
When adjusting the vertical size, The upper side of the image is fixed (table and ceiling mounted configurations) and only the lower
side can be moved to its exact position.
When adjusting the horizontal size, the left side of the image is fixed and only the right side can be moved to its exact position.
Image 7-5
Size adjustment
A Horizontal size adjustment
B Vertical size adjustment
Size adjustment
1. Push the cursor key ↑ or ↓ to highlight Size. (menu 7-43)
2. Press ENTER to select.
3. Push the cursor key ↑ or ↓ to size the image in a ver
tical direction.
Push the cursor key ← or → to size the image in a horizontal direction.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPECT RATIO [4:3]
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-43
While the bar scale window is on the screen,
press ENTER to change the value indication to an input field.
Enter the desired value with the numeric keys on the RCU. Always 3 digits should be entered. To toggle + to -
or vice versa, use the up or down arrow key.
7.4.5 Side Keystone
What can be done?
The side keystone adjustment is used to align the image if the projector is mounted at a non standard projection angle.
R5976562 BARCOSLM G10 PERFORMER 20/10/2004
75