Filter
Top Products
Descriptions & Connections
R5976743 BARCO M
AGIC II INTERFACE 24022004 _________________________________________ 2-3
BACK SIDE OF THE INTERFACE:
-DD15 output connector, labeled MONITOR OUT
The Monitor that was originally connected to your computer can be connected here for local monitoring
the images you want to be projected on your screen.
With an optional cable your Apple Mac Monitor can be connected to the interface.
-5 BNC connectors. These are the connection to the projector. R,G,B signals have standard levels
and should be terminated 75W.
The Hor/Comp OUT BNC is outputting composite sync when no 75W is connected to the Vert.
OUT BNC. If there is a 75W load on the Vert. OUT; then a Horizontal sync signal is available
on this output.
The Vert. output is providing Vertical sync signals and should be terminated 75 Ohm if used.
-Two green LEDs indicating signal presence at the sync outputs are available.
Red
OUT
MONITOR
OUT
MAINS
100-240V
0.12A 50/60Hz
Vert. H/Cs
Green
OUT
Blue
OUT
Hor/Comp
OUT
Vert.
OUT