Filter
Top Products
Safety Instructions
R5976743 BARCO MAGIC II INTERFACE 24022004 ________________________________________ 1-3
If the Power cord of the Interface is equipped with a ANSI 73.11 PLUG,
B. Power cord with ANSI 73.11 plug :
The wires of the power cord are colored in accordance with the following
code.
Green / Yellow : Ground
White : Neutral
Black : Line (live)
3. Do not allow anything to rest on the power cord. Do not locate this product where persons
will walk on the cord.
To disconnect the cord, pull it out by the plug. Never pull the cord itself.
4. If an extension cord is used with this product, make sure that the total of the ampere ratings
on the products plugged into the extension cord does not exceed the extension cord ampere
rating. Also make sure that the total of all products plugged into the wall outlet does not
exceed 15 amperes.
5. Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electrical
shock.
Never spill liquid of any kind on the product. Should any liquid or solid object fall into the
cabinet, unplug the set and have it checked by qualified service personnel before resuming
operations.
6. Lightning - For added protection for this video product during a lightning storm, or when
it is left unattended and unused for long periods of time, unplug it from the wall outlet. This
will prevent damage to the projector due to lightning and AC power-line surges.
On installation
1. Do not use this equipment near water.
2. To ensure reliable operation of the product and to protect it from overheating, these
openings must not be blocked or covered. The openings should never be blocked by placing
the product on a bed, sofa, rug, or other similar surface. This product should never be
placed near or over a radiator or heat register.